Stephenson Tile Co. Naples, Florida

A rollover curb shower is a form of curbless shower.  If the shower floor cannot be recessed or the bathroom floor cannot be raised then this is the best solution                                                                        

Liquid applied waterproofing with fabric reinforcing bonds directly to the cement work. Two coats are required to insure a leakproof installation.

The 6"x6" tile is laid diagonal to allow for 1/4" per foot pitch to the drain and a level perimeter.  Plumbing codes require a minimum of 1" height from the top of the drain  to the top of the "curb" . The rollover curb is about 3/4" of an inch in height and 6 " wide to allow for easy wheelchair access.  As long as the shower curtain is touching the floor inside the curb only a few drops of water will escape.